New Potential Sulfide Reference Materials for Microbeam S‐Fe‐Cu Isotope Measurements

S‐Fe‐Cu isotope systems are powerful tracers for revealing geochemical processes. However, the microanalysis of S‐Fe‐Cu isotopes is critically limited by the lack of suitable reference materials. Herein, we present three potential reference materials Ll‐Cpy (chalcopyrite), Ll‐Po (pyrrhotite) and Ll‐Sp (sphalerite) for in situ S‐Fe‐Cu isotope measurements. Numerous in situ S‐Fe‐Cu isotope measurements were performed over two years to assess isotopic homogeneity. The bulk S isotopic compositions were determined independently in seven laboratories by isotope ratio mass spectrometry (IRMS); the preferred δ 34 S V‐CDT for Ll‐Cpy, Ll‐Po, Ll‐Sp are 6.13 ± 0.37‰ (2 s ), 6.42 ± 0.37‰ (2 s ) and 6.28 ± 0.38‰ (2 s ), respectively. The bulk Fe isotope ratios in Fe‐bearing Ll‐Cpy and Ll‐Po were determined using solution nebulisation multi‐collector inductively coupled plasma‐mass spectrometry, and the obtained δ 56 Fe IRMM‐014 values are 0.57 ± 0.07‰ (2 s ) and ‐0.62 ± 0.07‰ (2 s ), respectively. The mean bulk δ 65 Cu NIST SRM 976 value of Ll‐Cpy is 0.57 ± 0.06‰ (2 s ). All the bulk values are in good agreement with the long‐term statistical results of laser ablation‐MC‐ICP‐MS and proposed as the recommended values. These sulfides are well characterised and isotopically homogeneous (at 30–40 μm spatial resolution), and can be used as potential calibration materials for in situ S‐Fe‐Cu isotope measurements.