抗压强度
灰浆
材料科学
硅酸盐水泥
固化(化学)
废物管理
城市固体废物
磨细高炉矿渣
水泥
复合材料
冶金
工程类
作者
Margarida Gonçalves,Inês Silveirinha Vilarinho,Marinélia N. Capela,Ana P. F. Caetano,Rui M. Novais,J.A. Labrincha,M.P. Seabra
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2021-05-28
卷期号:14 (11): 2911-2911
被引量:31
摘要
Ordinary Portland Cement is the most widely used binder in the construction sector; however, a very high carbon footprint is associated with its production process. Consequently, more sustainable alternative construction materials are being investigated, namely, one-part alkali activated materials (AAMs). In this work, waste-based one-part AAMs binders were developed using only a blast furnace slag, as the solid precursor, and sodium metasilicate, as the solid activator. For the first time, mortars in which the commercial sand was replaced by two exhausted sands from biomass boilers (CA and CT) were developed. Firstly, the characterization of the slag and sands (aggregates) was performed. After, the AAMs fresh and hardened state properties were evaluated, being the characterization complemented by FTIR and microstructural analysis. The binder and the mortars prepared with commercial sand presented high compressive strength values after 28 days of curing-56 MPa and 79 MPa, respectively. The mortars developed with exhausted sands exhibit outstanding compressive strength values, 86 and 70 MPa for CT and CA, respectively, and the other material’s properties were not affected. Consequently, this work proved that high compressive strength waste-based one-part AAMs mortars can be produced and that it is feasible to use another waste as aggregate in the mortar’s formulations: the exhausted sands from biomass boilers.
科研通智能强力驱动
Strongly Powered by AbleSci AI