It’s a Trap: A Case of Strangulated Coronary Guidewire and Longitudinal Stent Deformation in the Right Coronary Artery

[b]BACKGROUND[/b] Strangulation of the coronary guidewire is an infrequent complication of percutaneous coronary intervention (PCI), and it can lead to disastrous outcomes of stent thrombosis, vessel occlusion, and vessel damage. [b]CASE REPORT[/b] Early-generation stents were made from stainless steel and had a bulky design as compared to cobalt-chromium or platinum chromium alloys, which have superior trackability at the cost of a thin core and low-strength struts, resulting in increased incidence of longitudinal stent deformation. We present a case of a 62-year-old active smoker with effort angina of Canadian Cardiovascular Society (CCS) class III. His coronary angiogram revealed a totally occluded right coronary artery (RCA). After placing 2 coronary guidewires (Run-through and Balanced middle-weight), Xience Xpedition (3.25×48 mm) and Promus Element (2.75×32 mm) were deployed through the whole length of the RCA. While placing the distal stent, the guidewire securing the posterior left ventricular (PLV) was trapped between 2 stents and all attempted maneuvers were unsuccessful in retrieving the wire. The stents sustained longitudinal deformation by the guide catheter, and subsequent arteriotomy for stent and wire retrieval and coronary artery bypass graft surgery were (CABG) performed. [b]CONCLUSIONS[/b] Despite the remarkable safety profiles of the percutaneous equipment, complications still occur even with experienced operators. Calcified and tortuous vessels are primarily at risk for wire strangulation between stents or side-branches, and better deliverability of newer drug-eluting stents (DES) comes at the cost of reduced longitudinal strength.