结晶
聚乳酸
材料科学
动力学
化学工程
活化能
等温过程
复合材料
高分子化学
聚合物
热力学
化学
有机化学
物理
量子力学
工程类
作者
Hongwei Yang,Jianjun Du
标识
DOI:10.1016/j.ijbiomac.2023.127232
摘要
Polymer crystallization affects material microstructure and the final product quality, and the crystallization kinetics that govern this process are critical. In this study, alkali-treated Ginkgo biloba fibers (GFs) were melt blended with polylactic acid (PLA) to obtain GF/PLA blends. The non-isothermal crystallization kinetics of the GF/PLA composites were subsequently investigated using the Avrami, Jeziorny, Ozawa, and Liu-Mo methods, and the crystallization activation energies of the systems were calculated by Kissinger and Friedman models. The results showed that the GFs significantly promoted PLA crystallization, accelerated the crystallization rate, and shortened the crystallization time. The Avrami method showed some deviation from the linear relationship due to the effect of secondary crystallization, while the numeric value obtained by the Jeziorny method increased with the cooling rate. The Ozawa method could only be used in a very narrow range of temperatures, while the Liu-Mo method showed a more desirable fit. Crystallization activation energy calculations showed that the GFs promoted an increase in the crystallization capacity of the blend and a decrease in the effective potential barrier. This resulted in more selective biocomposites than pure PLA, offering greater applicability in domains including tissue engineering and 3D printing.
科研通智能强力驱动
Strongly Powered by AbleSci AI