Swelling properties of copolymers of styrene and divinylbenzene containing sulfonic and carboxylic acid groups

Abstract Copolymers of styrene, divinylbenzene, and acrylic acid that have undergone sulfonation exhibited good water absorbency properties. Removal of the lower molecular weight fraction in the surface region of the copolymer particles by toluene extraction before sulfonation has further increased the water swelling capacity of the sulfonated copolymers. The extent of swelling of the UV‐irradiated copolymer could be related to the ratio of divinylbenzene to styrene. The less crosslinked copolymers were shown to absorb more water. The incorporation of more carboxylate groups in the copolymer could further increase its swelling capacity. Without UV irradiation, the carboxylate containing copolymer was found to absorb more water than the sulfonated copolymer. UV irradiation has induced more effective crosslinking in the carboxylate containing copolymer, hence impairing its water absorbency. By replacing styrene and divinylbenzene partially with butyl acrylate, whereby the amount of crosslinking was reduced, the copolymer was able to absorb water 110 times of its dry weight. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009