Proteinaceous porous nanofiber membrane-type adsorbent derived from amyloid lysozyme protofilaments for highly efficient lead(II) biologic scavenging

To overcome the technical bottleneck of fine amyloid lysozyme fibrils in environmental engineering, a novel co-operative strategy was identified to fabricate free-standing lysozyme complex nanofibers based membrane-type adsorbent (Lys-CNFs membrane) through a combination of vacuum filtration for lead remediation. The composition of the membrane integrated the linear amyloid protofilaments that were obtained by acid-heating fibrillation and polydopamine that adjusted the fibers' diameters and surface chemistry. As expected, the Lys-CNFs membrane not only showed nanofibrous morphology and layer stacking architecture but presented a hierarchical macro-mesoporous structure along with a high surface area of 220.4 m2/g. Besides, the thermal stability up to 200 ℃ and wetting nature of below 2 s endowed its further applicability. Adsorption experiments showed that Lys-CNFs membrane can effectively uptake Pb(II) ions with acceptable selectivity, high adsorption capacity of 270.3 mg/g, rapid equilibrium kinetic within only 10 mins, and good reusability that dropped by 14.9% efficiency even after five cycles, indicating that Lys-CNFs membrane can be as an affordable technology for alleviating the lead pollution issues.