偏压
PIN二极管
带宽(计算)
电阻抗
二极管
电子工程
电压
计算机科学
雷达
工程类
电气工程
电信
作者
Ashish Suri,Kumud Ranjan Jha
出处
期刊:International Journal of Microwave and Wireless Technologies
[Cambridge University Press]
日期:2023-11-15
卷期号:: 1-15
标识
DOI:10.1017/s1759078723001332
摘要
Abstract Radar absorption structures made of an active frequency selective surfaces (AFSS) have enormous potential in the aviation, naval, and other industries. In this research paper, a systematic review (SR) is carried out in the field of the AFSS to bring uncertainties, obstacles, challenges, classifications, applications, and design issues that arrive in the development of the sub-6 GHz architecture. To bias the AFSS component, as per the signal requirements, a unique set of circuits (PIN diode) is required, with ON and OFF state and a transmission zone. The bandwidth of which is determined by the bias voltage supplied. It can behave as a complicated hybrid impedance structure by providing ON and OFF biasing voltage to a PIN diode embodied in an FSS structure. Higher manufacturing costs of AFSS components, more significant complexities involved, a large amount of power consumption, and reactive impedance losses are some common limitations faced while implementing and designing an AFSS. Many envisioned problems are corrected with the AFSS design, current or creative implementations, and processing parameters are investigated progressively. It implies that new AFSSs will be an alternative to regular FSSs in the future. This paper is based on Kitchenham’s three-phase review procedure and supplements it with results, views, and recommendations from other leading experts in the field.
科研通智能强力驱动
Strongly Powered by AbleSci AI