Carbonization of a Molybdenum Substrate Surface and Nanoparticles by a One-Step Method of Femtosecond Laser Ablation in a Hexane Solution

Molybdenum carbides (MoC and Mo₂C) are being reported for various applications, for example, catalysts for sustainable energies, nonlinear materials for laser applications, protective coatings for improving tribological performance, and so on. A one-step method for simultaneously fabricating molybdenum monocarbide (MoC) nanoparticles (NPs) and MoC surfaces with a laser-induced periodic surface structure (LIPSS) was developed by using pulsed laser ablation of a molybdenum (Mo) substrate in hexane. Spherical NPs with an average diameter of 61 nm were observed by scanning electron microscopy. The X-ray diffraction pattern and electron diffraction (ED) pattern results indicate that a face-centered cubic MoC was successfully synthesized for the NPs and on the laser-irradiated area. Notably, the ED pattern suggests that the observed NPs are nanosized single crystals, and a carbon shell was observed on the surface of MoC NPs. The X-ray diffraction pattern of both MoC NPs and LIPSS surface indicates the formation of FCC MoC, agreeing with the results of ED. The results of X-ray photoelectron spectroscopy also showed the bonding energy attributed to Mo-C, and the sp²-sp³ transition was confirmed on the LIPSS surface. The results of Raman spectroscopy have also supported the formation of MoC and amorphous carbon structures. This simple synthesis method for MoC may provide new possibilities for preparing Mo _x C-based devices and nanomaterials, which may contribute to the development of catalytic, photonic, and tribological fields.