Ceramic Aneurysm Clip with Titanium Spring

To design and evaluate ceramic aneurysm clips with integrated titanium springs, focusing on ergonomic application and precision in neurosurgical procedures. The clip design was executed with precision using Creo Parametric 3D CAD software. It comprises a zirconia body and a titanium spring for durability and consistent tension and features a four-coil hairpin titanium spring for enhanced closing force and a ball-type head for versatile maneuverability during surgery. To assess durability, closing forces were rigorously measured using a force gauge system, comparing the ceramic clip with the standard Mizuho permanent clip over 30 open-close cycles. For MR artifact assessment, both ceramic and Yasargil clips were evaluated using a 3 Tesla magnetic resonance imaging (MRI) scanner with specific imaging sequences. The straight type ceramic clip's initial closing force was 1.70 N, dropping to 1.22 N after 30 cycles, indicating a retention of 72% of its initial force. In MRI, the ceramic clip displayed significantly lower measurement discrepancies compared to the titanium alloy Yasargil clip, particularly in high resolution T1 weighted images. The lowest variance was at measurement point L2, where the ceramic clip showed 3% discrepancy. Further, the ceramic clip yielded clearer images than the titanium alloy clip, particularly at the clip's end. Ceramic clips with titanium springs demonstrated satisfactory closing force and superior MRI compatibility, promising enhancements in surgical application and postoperative assessment.