Incorporating α-Al2O3 Nanodots into Expanded Graphite Anodes toward Stable Fast Charging for Lithium-Ion Batteries

High-power lithium-ion batteries place high demands on the fast charging ability of electrode materials, while for the current graphite anode, it suffers from anisotropic and sluggish Li+ transport due to its small interlayer spacing. In addition, the large polarization at low lithiation potential at a high rate leads to Li+ deposition and side reactions of Li with the electrolyte. In this work, α-Al2O3 nanodots incorporated into aggregates of thin-layer graphite have been developed by facile high-energy ball milling of graphite and layer-structured pseudo-boehmite. By optimization, the ball-milled graphite/Al2O3 (BG/Al2O3) manifests a high reversible capacity of 344 mAh g–1 higher than the 98.7 mAh g–1 of graphite after 500 cycles at 1 A g–1 (∼2.7C) and 200 mAh g–1 higher than the 59.6 mAh g–1 of raw graphite at 3 A g–1 after 500 cycles. The wrinkled edges and expanded interlayer spacing generated by high-energy ball milling optimize the Li+ transport and accelerate reaction kinetics, contributing high pseudocapacitance and enabling fast charging ability. The α-Al2O3 nanodots can decrease the side reactions between the electrolyte and graphite electrode, contributing high cyclic stability. This study lays a foundation for the one-step mechanical force chemistry method to prepare highly stable fast-charging graphite anode materials for lithium-ion batteries.