3D-printed polylactic acid-microencapsulated phase change material composites for building thermal management

The integration of phase change materials (PCM) into architectural elements is an emerging strategy to enhance thermal energy storage in modern buildings. This research examines 3D-printed polylactic acid structures incorporated with microencapsulated PCM, targeting a more efficient thermoregulation in foundational architectural sections such as walls, floors, and ceilings. Through rigorous evaluations, the polylactic acid-PCM composite revealed promising thermoregulatory properties. Notably, latent heat values stood at 198.4 J/g for melting and 197.9 J/g for freezing. Real-world experiments demonstrated a distinct advantage, maintaining temperatures 3.2°C–3.3 °C higher than standard polylactic acid at night and exhibiting a cooler range of 10.4 °C–13.3 °C during daylight. Within specific geographical contexts, like the Mediterranean and Aegean Seas coastline, 0.026 m thick polylactic acid-PCM panels stood out, registering 100 % energy savings. The findings consistently showed that an increase in panel thickness correlated with a decrease in building heating needs. Further analysis explored the carbon emissions landscape. Coal, when utilized with 0.05 m-thick polylactic acid-PCM panels, was identified as particularly effective, yielding a reduction of 34 kg/m2 in annual CO2 emissions. Collectively, the findings underscore the transformative potential of polylactic acid-PCM composites, positioning them as pivotal tools for advancing architectural energy efficiency and fostering sustainable building innovations.