Effects of β-stabilizer elements on microstructure formation and mechanical properties of titanium alloys

Binary Ti-4(Nb, V, Fe) alloys were prepared to investigate the effects of β-stabilizers (Nb, V and Fe) on microstructure formation and mechanical properties of titanium alloys by using experimental and theoretical methods. Microstructure observations revealed that addition of Nb, V or Fe significantly tailored the microstructure under different heat-treated conditions, i.e., furnace-cooled (FC), air-cooled (FC) and water-quenched (WQ). The FC Ti–4(Nb, V, Fe) alloys exhibited the Widmanstätten microstructure and the AC samples showed the spheroidized microstructure. The WQ Ti–4Fe exhibited the microstructure composed of equiaxed β grains and nanoscale ω particles while the WQ Ti–4Nb and Ti–4V showed the martensite microstructure. Differentials of microstructure can be attributed to the effects of Nb, V and Fe elements on the phase stability and energy barrier of phase transformation according to the empirical electron theory (EET) of solids and molecules. Results of tensile tests showed that Nb, V and Fe significantly influenced the tensile properties under the different heat treatments. Both the WQ Ti–4Nb and Ti–4V showed the larger tensile strength than that of the FC and AC sample due to the stronger solid-solution and phase-interface strengthening in martensite structure. The WQ Ti–4Fe sample exhibited the largest tensile strength (1104 MPa) compared to that of the FC (754 MPa) and AC (981 MPa) samples due to the strongest solid-solution and phase-interface strengthening from the ω phase. By executing the methods of the empirical electron theory (EET) of solids and molecules, effects of β-stabilizers (Nb, V and Fe) on microstructure formation and mechanical properties of titanium alloys were revealed on the view of valence electron.