Biomechanical effects of deltoid muscle atrophy on rotator cuff tissue: a finite element study

Abstract The deltoid muscle and rotator cuff tissue are structural components that maintain the dynamic stability of the shoulder joint. However, atrophy of the deltoid muscle may affect the stability of the shoulder joint, which in turn alters the mechanical distribution of rotator cuff tissue. Currently, the effect of muscle volume changes in the deltoid muscle on reducing the load on the rotator cuff tissue is still unknown. Therefore, this paper intends to analyze the mechanical changes of rotator cuff tissue by deltoid muscle atrophy through finite elements. Based on previously published finite element shoulder models, the deltoid muscle was modeled by constructing deltoid muscle models with different degrees of atrophy as, 100% deltoid muscle (Group 1), 80% deltoid muscle (Group 2), and 50% deltoid muscle (Group 3), respectively. The three models were given the same external load to simulate glenohumeral joint abduction, and the stress changes in the rotator cuff tissue were analyzed and recorded. In all three models, the stress in the rotator cuff tissue showed different degrees of increase with the increase of abduction angle, especially in the supraspinatus muscle. At 90° of glenohumeral abduction, supraspinatus stress increased by 58% and 118% in Group 2 and Group 3, respectively, compared with Group 1; In the subscapularis, the stress in Group 3 increased by 59% and 25% compared with Group 1 and Group 2, respectively. In addition, the stress of the infraspinatus muscle and teres minor muscle in Group 2 and Group 3 were higher than that in Group 1 during the abduction angle from 30° to 90°. Deltoid atrophy alters the abduction movement pattern of the glenohumeral joint. During glenohumeral abduction activity, deltoid atrophy significantly increases the stress on the rotator cuff tissue, whereas normal deltoid volume helps maintain the mechanical balance of the rotator cuff tissue.