Preparation of blast furnace dust particle electrodes and their application in synergistic electrochemical degradation of saline polyvinyl alcohol wastewater

Polyvinyl alcohol (PVA) has been widely used as a water-soluble plastic in laundry and dish detergent pods, yet wastewater contaminated with PVA is too difficult to be treated due to its high salinity and foaming. Here, we fabricated blast furnace dust (BFD) particle electrodes, and developed a three-dimensional electrocatalytic system (3DEC) to treat saline PVA wastewater. The optimum preparation condition for BFD particle electrode was iron carbon ratio of 2:1 doping with TiO2. The optimal parameters of 3DECs for PVA wastewater degradation were thoroughly investigated, with current density of 30 mA/cm2, electrode distance of 30 mm, pH value of 7.0, and particle electrode filling rate of 50%. PVA wastewater degradation rate could reach 89.33% within 120 min. The underlying mechanism of iron-carbon micro electrolysis and electrocatalytic system was further studied. PVA wastewater was degraded by direct catalytic oxidation from electrodes. A scavenger experiment showed that free radicals consisting of •OH and HClO mainly contributed to the PVA wastewater degradation. HClO was generated by Cl− at the electrocatalysis and micro electrolysis of particles. In addition, the lifetime of the prepared BFD particle electrode was 120 h, which exhibited electrochemical stability. These findings highlight that the 3DECs coupled with BFD particle electrode is a promising electrocatalysis process for the removal of PVA wastewater.