胶凝的
吸附
材料科学
表面张力
Zeta电位
硅烷
化学工程
水泥
复合材料
收缩率
硅粉
化学
有机化学
纳米颗粒
纳米技术
工程类
物理
量子力学
作者
Yihan Ma,Jingjing Bai,Caijun Shi,Shengnan Sha,Beibei Zhou
标识
DOI:10.1016/j.cemconres.2020.106343
摘要
Abstract Polycarboxylate ethers (PCEs) with different structures and densities of anchor groups in the backbone were synthesized and characterized. The surface tension of their solutions, their adsorption on cementitious particles and zeta potential of cement-silica fume pastes with PCEs were measured. Their effects on hydration and properties of cement-silica fume paste with low water-to-binder ratio were examined. Results indicated that the adsorption kinetics of theses PCEs on cementitious particles are fitted the pseudo-second-order model. The introduction of long silane chain on PCE decreased its electrostatic adsorption, while PCE was adsorbed onto the surface of particles via both chemical and electrostatic adsorption, when silicon hydroxyl is directly connected to its backbone. In the presence of PCE with higher adsorbed amount, pastes exhibited lower yield stress and higher flowability, and higher strength at 7 d and 28 d. The low plastic viscosity, autogenous and drying shrinkage were related to the low surface tension of PCE solution.
科研通智能强力驱动
Strongly Powered by AbleSci AI