Additive Manufacturing of a Release Agent Injection Manifold for Hot Forging

In this study, design for additive manufacturing (DfAM) of release agent injection manifold for hot forging has been performed to achieve weight reduction and flow path optimization. The weight reduction of 53.5% was achieved, thereby enabling the application of stainless steel 316L, which has high strength and corrosion resistance. Lightweight manifolds using Al-Mg-10Si and SUS316L materials were fabricated by PBF-type metal 3D printer. The feasibility test showed that mold life was improved by 14% by solving residual release agent problem. In addition, the flow path optimization results suggested that the flow standard deviation of each outlet dropped sharply from 264 to 75 ㎤/s. This approach demonstrated that DfAM for release agent manifold could be applied to increase mold life and improve product quality and productivity for hot forging.