铆钉
结构工程
剪切(地质)
材料科学
抗剪强度(土壤)
直剪试验
冷弯型钢
复合材料
工程类
有限元法
地质学
土壤科学
土壤水分
作者
Zhiqiang Xie,Weiming Yan,Cheng Yu,Tingting Mu,Linlin Song
标识
DOI:10.1016/j.tws.2018.03.025
摘要
In order to introduce self-piercing rivet (SPR) technique to component connections of thin-walled steel structures, 78 SPR joints were tested to evaluate their quality and the shear strength. Parameters included in this test program were the sheet thickness, and the rivet. Based on test results, the research developed an empirical formula between the combination thicknesses of sheet and rivet length, and proposed quality evaluation standard of SPR connections and a new design method of shear strength. The test results showed that sheet thickness and sheet thickness ratio had a great effect on failure mode, and rivet length was a key factor on shear properties of SPR connections. The proposed quality evolution standard and design calculation method of shear strength in this paper had certain reasonability and reliability.
科研通智能强力驱动
Strongly Powered by AbleSci AI