材料科学
复合数
化学工程
电解质
锂(药物)
离子电导率
环氧乙烷
氧化物
聚合物
复合材料
物理化学
冶金
电极
化学
共聚物
内分泌学
工程类
医学
作者
Huanhuan Duan,Liansheng Li,Kaixiang Zou,Yuanfu Deng,Guohua Chen
标识
DOI:10.1021/acsami.1c18589
摘要
Poly(ethylene oxide) (PEO)-based composite solid electrolytes (CSEs) are considered as one of the most promising candidates for all-solid-state lithium batteries (ASSLBs). However, a key challenge for their further development is to solve the main issues of low ionic conductivity and poor mechanical strength, which can lead to insufficient capacity and stability. Herein, β-cyclodextrin (β-CD) is first demonstrated as a multifunctional filler that can form a continuous hydrogen bond network with the ether oxygen unit from the PEO matrix, thus improving the comprehensive performances of the PEO-based CSE. By relevant characterizations, it is demonstrated that β-CD is uniformly dispersed into the PEO substrate, inducing adequate dissociation of lithium salt and enhancing mechanical strength through hydrogen bond interactions. In a Li/Li symmetric battery, the β-CD-integrated PEO-based (PEO-LiTFSI-15% β-CD) CSE works well at a critical current density up to 1.0 mA cm-2 and retains stable lithium plating/stripping for more than 1000 h. Such reliable properties also enable its superior performance in LiFePO4-based ASSLBs, with specific capacities of 123.6 and 114.0 mA h g-1 as well as about 100 and 81.8% capacity retention over 300 and 700 cycles at 1 and 2 C (1 C = 170 mA g-1), respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI