Design and analysis of planar four-port UWB-MIMO antenna with band-rejection capability

Abstract This manuscript presents a 50 Ω microstrip-fed quad-element high isolated ultra-wideband (UWB) multiple-input multiple-output (MIMO) antenna with band-notched characteristics. The overall area of the proposed structure is 0.33 λ o × 0.33 λ o mm 2 (where λ o depicts the free space wavelength corresponding to the lower cutoff frequency, i.e. 2.54 GHz), etched on an FR-4 substrate of thickness 0.8 mm. The top layer has four semicircular disc-shaped radiating elements that are identical and orthogonal to obtain better inter-element isolation and compactness. A reverse two-shaped slot is etched onto the radiating patches to attain a band-rejection capability. Moreover, a decoupling structure is also placed at the top layer to suppress the unwanted surface waves. The bottom layer consists of a ground plane, which is further modified with quasi-self complementary and meandered line slots. A rectangular slot is also etched below the feed line to better match the impedance near the lower cutoff frequencies. The simulated reflection coefficients ( S 11 ) of the proposed antenna are less than −10 dB over 2.54 to 10.74 GHz frequencies except at 3.37 to 4.15 GHz (WiMAX/C band), and the simulated inter-port isolation ( S 21 ) is greater than −15 dB over the entire UWB range of frequencies (3.1 to 10.6 GHz). Also, the measured S -parameter results well agreed with the simulated ones. Furthermore, the simulation study of the 20-element UWB-MIMO antenna is also investigated using the proposed quad-element structure.