Stress changes in the ground below ballasted railway track during train passage

The design of railway track formations has traditionally been empirically rather than analytically based, with ballast and sub-ballast layer thicknesses specified mainly on the basis of previous practice. Recent design methods are more scientifically based, and for the most advanced design methods currently in use, input parameters are typically determined from cyclic triaxial testing. The changes in stress experienced by an element of soil below a railway track as a train passes are complex, involving (for example) a cyclic rotation of the principal stress directions. In these conditions, soil element testing in uniaxial compression may lead to the underestimation of vertical strains. Testing in a hollow cylinder apparatus, which can impose the rotations in principal stress direction likely to be experienced by a soil element in the field, may therefore be preferable to triaxial testing. However, there are as yet no data to guide the designer to a rational specification of a testing programme in this more complex apparatus. This article reports the results of finite element analyses carried out to investigate the stress changes experienced by an element of soil beneath a ballasted railway track during train passage. The effects of element location, the initial in situ stress state of the soil, and the elastic parameters used to characterize its behaviour are investigated, and the modelling of the stress paths in a cyclic hollow cylinder apparatus is discussed.