Research on the Influence of the Closing Amount of Electrical Connector Contacts on Fretting Wear under a Vibration Environment

As a key component for transmitting electrical signals, the electrical contact performance of electrical connectors is directly affected by the closing amount of the socket. It is urgent to explore the relationship between contact resistance and the closing amount of cylindrical groove electric connectors, as well as the range of the closing amount when their comprehensive performance is optimal in vibration environments. Based on Hertz contact theory, the long- and short-axis parameters of the contact elliptical surface were obtained using the Boussinesq solution and the contact deformation coordination equation. An electrical contact resistance (ECR) theoretical model was obtained using Holm’s electric contact theory and the GW contact model. According to the ECR and long- and short-axis parameters of the contact elliptical surface and the theoretical model of contact resistance, an ECR model based on changes in the initial closing amount (deflection) of the socket spring was established by introducing the cantilever beam model of the socket spring. Then, the failure mechanism of fretting wear and the change mechanism of the ECR of the electrical connectors under a vibration environment were analyzed using the sinusoidal vibration test of electric connectors. The optimal range of the initial closing amount of the cylindrical-groove-closing-type electrical connector socket spring was determined, providing a reference for the reliability designs of electrical connectors.