Fracture Resistant CrSi2‐Doped Silicon Nanoparticle Anodes for Fast‐Charge Lithium–Ion Batteries

Abstract Lithium–ion batteries (LIBs) has been developed over the last three decades. Increased amount of silicon (Si) is added into graphite anode to increase the energy density of LIBs. However, the amount of Si is limited, due to its structural instability and poor electronic conductivity so a novel approach is needed to overcome these issues. In this work, the synthesized chromium silicide (CrSi 2 ) doped Si nanoparticle anode material achieves an initial capacity of 1729.3 mAh g −1 at 0.2C and retains 1085 mAh g −1 after 500 cycles. The new anode also shows fast charge capability due to the enhanced electronic conductivity provided by CrSi 2 dopant, delivering a capacity of 815.9 mAh g −1 at 1C after 1000 cycles with a capacity degradation rate of <0.05% per cycle. An in situ transmission electron microscopy is used to study the structural stability of the CrSi 2 ‐doped Si, indicating that the high control of CrSi 2 dopant prevents the fracture of Si during lithiation and results in long cycle life. Molecular dynamics simulation shows that CrSi 2 doping optimizes the crack propagation path and dissipates the fracture energy. In this work a comprehensive information is provided to study the function of metal ion doping in electrode materials.