“MOF-cloth” formed via supramolecular assembly of NH2-MIL-101(Cr) crystals on dopamine modified polyimide fiber for high temperature fume paper-based filter

A facile route to rapidly assemble presynthesized MOF [NH2-MIL-101(Cr)] crystals onto polyimide (PI) fibers at ambient temperature was proposed in this article. Furthermore, [email protected]@MOF fibers were used to fabricate the paper-based filters for high temperature dust removing by wet-forming process. Prior to this, dopamine was dip-coated onto the surface of inert PI fibers to active the fiber surface. Herein, MOF crystals were chemically induced using β-cyclodextrin (β-CD) and cetyltrimethylammonium bromide (CTAB) as surfactant assembly agents, which quickly self-assembled on the crystal surface and promoted robust chemical surface attachment onto the activated [email protected] fibers. BET results manifested that the overall surface area of [email protected]@MOF fibers exceeded 800 m2/g with assistance of “MOF-cloth”. Filtration performance experimental results indicated that removal efficiency of composites reached as high as 93.05 ± 1.27% at a lower pressure drop of 57.5 Pa and a higher quality factor of 0.0464 Pa-1 for PM0.3 under the high temperature of 260 °C.