Effect Analysis of Various Gradient Particle Size Distribution on Electrical Performance of Anode-Supported SOFCs With Gradient Anode

Abstract Gradient particle size anode has shown great potential in improving the electrical performance of anode-supported solid oxide fuel cells (SOFCs). In this study, a 3D comprehensive model is established to study the effect of various gradient particle size distribution on the cell electrical performance for the anode microstructure optimization. The effect of homogeneous particle size on the cell performance is studied first. The maximum current density of homogeneous anode SOFC is obtained for the comparison with the electrical performance of gradient anode SOFC. Then the effect of various gradient particle size distribution on the cell molar fraction, polarization losses, and electronic current density distribution is analyzed and discussed in detail. Results show that increasing the particle diameter gradient can effectively reduce the anodic concentration overpotential. Decreasing the particle diameter of anode functional layer 2 is beneficial for reducing the activation and ohmic overpotentials. On these bases, the comprehensive electrical performance of SOFCs with gradient particle size anode and homogeneous anode is compared to highlight the optimal gradient particle diameter distribution. In the studied cases of this work, the gradient particle diameter of 0.7 μm, 0.4 μm, and 0.1 μm at anode support layer (ASL), anode functional layer 1, and anode functional layer 2 (case 3) is the optimal particle size distribution.