Study of Typical Ruptured and Unruptured Intracranial Aneurysms Based on Fluid–Structure Interaction

Most intracranial aneurysms (IAs) will be abnormal bulges on the walls of intracranial arteries that result from the dynamic interaction of geometric morphology, hemodynamics, and pathophysiology. Hemodynamics plays a key role in the origin, development, and rupture of IAs. In the past, hemodynamic studies of IAs were mostly based on the rigid wall hypothesis of computational fluid dynamics, and the influence of arterial wall deformation was ignored. We used fluid-structure interaction (FSI) to study the features of ruptured aneurysms, because it can solve this problem very well and the simulation will be more realistic.A total of 12 IAs, 8 ruptured and 4 unruptured, at the middle cerebral artery bifurcation were studied using FSI to better identify the characteristics of ruptured IAs. We studied the differences in the hemodynamic parameters, including the flow pattern, wall shear stress (WSS), oscillatory shear index (OSI), and displacement and deformation of the arterial wall.Ruptured IAs had a larger low WSS area and more complex, concentrated, and unstable flow. Also, the OSI was higher. In addition, the displacement deformation area at the ruptured IA was more concentrated and larger.A large aspect ratio; a large height/width ratio; complex, unstable, and concentrated flow patterns with small impact areas; a large low WSS region; large WSS fluctuation, high OSI; and large displacement of the aneurysm dome could be risk factors associated with aneurysm rupture. If similar cases are encountered when simulation is used in the clinic, priority should be given to diagnosis and treatment.