Survey on present status of noise exposure of workers in metal processing industry

Objective: To investigate the distribution of noise exposure between non-steady state noise and steady-state noise for metal processing workers, which will provide scientific basis for the prevention and treatment of noise hazards in metal processing industry. Methods: The cross-section method was used to investigate the noise exposure of 737 workers from three metal processing industries in Zhejiang Province from October to December 2017. The general demographic information and occupational history were collected by questionnaire. The noise was recorded by individual noise meters, and the noise exposure intensity (equivalent continuous A-weighted noise exposure level normalized to an 8 h-working-day, L(Aeq, 8 h)) and kurtosis were calculated. Results: Workers exposed to noise in the metal processing industry were mainly 18-40 years old (527 workers, 71.51%) , men (570 workers, 77.34%) , and junior high school education background (416 workers, 56.45%) . There were 572 workers (77.61%) with noise exposure intensity (L(Aeq, 8 h)) greater than 85 dB (A) , 558 workers (75.71%) exposed to non-steady state noise (kurtosis ≥4) , and 634 workers (86.02%) with exposure duration less than 8 years. Among the 30 work types investigated, the work types with noise intensity reaching 100% were the stamping, welding and others from a children's car manufacturing factory in Ningbo, operating, chamfering, tapping, and thread rolling from an automobile parts manufacturing factory in Ningbo; The work types with a rate of 100% exposed to non-steady state noise were the grinding from a children's car manufacturing factory in Ningbo, assembling, assembly operating and others from an automobile brake manufacturing factory in Wenzhou, and polishing from an automobile parts manufacturing factory in Ningbo. Conclusion: Metal processing workers have a high rate of over-standard exposed to high noise intensity and a high proportion exposed to non-steady state noise. It is necessary to take sound insulation and noise reduction engineering control, and strengthen personal protection and occupational health management measures to prevent and control the noise hazards.