A tough, healable, and recyclable conductive polyurethane/carbon nanotube composite

Recently, conductive composites have been used in flexible electronic devices and have attracted attention. The integration of self-healing, high sensitivity, large tensile strength, environmental stability, and easy recyclability into conductive composites is very desirable yet challenging. Hence, a conductive composite as a flexible strain sensor with a self-healing and recyclability is facilely developed, with a polyurethane (PU) elastomer bearing dynamic boronic ester as the polymer matrix and carbon nanotubes (CNTs) as a conductive filler. Due to the dynamic boronic ester bond and hydrogen bond, the prepared polyurethane conductive composite has good self-healing and mechanical properties. It not only has a high healing efficiency of 78 % but also has a tensile strength of 15.4 MPa and an elongation at break of 420 %. In addition, the prepared conductive composite has high conductivity (0.57 mS/cm) and sensitivity. As a wearable sensor, it can identify human activities in all directions, such as elbow and finger bending, speaking, and facial changes. Consequently, the polyurethane conductive composite prepared in this study exhibited wonderful application potential in wearable electronic devices such as self-healing strain sensors.