Microstructure Evolution in Plastic Deformed Bismuth Telluride for the Enhancement of Thermoelectric Properties

Thermoelectric generators are solid-state energy-converting devices that are promising alternative energy sources. However, during the fabrication of these devices, many waste scraps that are not eco-friendly and with high material cost are produced. In this work, a simple powder processing technology is applied to prepare n-type Bi2Te3 pellets by cold pressing (high pressure at room temperature) and annealing the treatment with a canning package to recycle waste scraps. High-pressure cold pressing causes the plastic deformation of densely packed pellets. Then, the thermoelectric properties of pellets are improved through high-temperature annealing (500 ∘C) without phase separation. This enhancement occurs because tellurium cannot escape from the canning package. In addition, high-temperature annealing induces rapid grain growth and rearrangement, resulting in a porous structure. Electrical conductivity is increased by abnormal grain growth, whereas thermal conductivity is decreased by the porous structure with phonon scattering. Owing to the low thermal conductivity and satisfactory electrical conductivity, the highest ZT value (i.e., 1.0) is obtained by the samples annealed at 500 ∘C. Hence, the proposed method is suitable for a cost-effective and environmentally friendly way.