硝酸盐
材料科学
吸附
金属间化合物
电化学
无机化学
化学工程
化学
冶金
有机化学
电极
物理化学
工程类
合金
作者
Shuanglong Zhou,Yu Dai,Qiang Song,Lina Lu,Xiao Yu
标识
DOI:10.1021/acsami.4c01739
摘要
Developing a high-performance electrocatalyst for synthesizing ammonia from nitrate represents a promising solution for addressing wastewater pollution and achieving sustainable ammonia production. However, it remains a formidable challenge. Herein, an intermetallic AuCu3 electrocatalyst with high-density active sites is designed and prepared for an efficient nitrate electroreduction to generate ammonia. Remarkably, the Faraday efficiency and yield rate of ammonia at -0.9 V are 97.6% and 75.9 mg h-1 cm-2, respectively. More importantly, after 10 cycles of testing, the removal rate of nitrate can still reach 95.2%. Electrochemical in situ Fourier transform infrared analysis indicates that AuCu3 IM can promote the adsorption of nitrate and enhance ammonia production from nitrate. *NH3, *NO, and *NO2 have been proven to be active intermediates. Theoretical and experimental studies show that the Au site can provide a large amount of *H for nitrate reduction, and the Cu site is conducive to the reduction of nitrate to produce nitrogen-containing products. Meanwhile, AuCu3 intermetallic compounds (AuCu3 IM) can inhibit the dimerization of *H. The power density and ammonia yield of the assembled Zn-nitrate battery reached 2.17 mW cm-2 and 71.2 mg h-1 cm-2, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI