Flow pattern-based heat transfer analysis of microchannel flow boiling: An experimental investigation

The present study investigates the flow boiling heat transfer and flow pattern of R245fa in a smooth, horizontal microchannel with an inner diameter of 1 mm. The experiments cover a range of mass flux from 300 to 700 kg/m2s and heat fluxes varying between 10 and 94 kW/m2, with corresponding saturation temperature of 23–54 °C. Heat transfer experiment results indicate that the local heat transfer coefficient (HTC) presents two distinct variation trends under different heat and mass flux conditions. In addition, the heat flux is positively correlated with the local HTC at each measure point. Visualization experiment results show that annular flow forms at low vapor quality and significantly influences heat transfer as the primary flow pattern. The flow boiling heat transfer of R245fa in the 1 mm microchannel can be characterized by three regimes: bubble/slug regime, liquid film evaporation regime, and intermittent dryout regime. Thin liquid film evaporation and intermittent dryout during annular flow predominately contribute to heat transfer. Finally, the experimental HTC is compared with five different predictive methods, revealing that the three-zone model proposed by Thome et al. [46] holds immense potential for estimating the local HTC in the microchannel.