Novel LiFePO4/very-few-layer-graphene (LFP/VFLG) composites to improve structural and electrochemical properties of lithium-ion battery cathode

LiFePO4/Very-few-layer-graphene (LFP/VFLG) composites have been prepared using the sol-gel method for lithium-ion battery cathode. VFLG dominated by 1∼3 layers was obtained from an economical and environmentally benign process. Structural properties of LFP/VFLG composites were studied using Fourier-transform infrared spectra (FTIR) spectroscopy, X-ray diffractometry (XRD), high-resolution transmission electron microscopy (HRTEM) and Raman spectroscopy, while the electrochemical performance was measured using galvanostatic discharge, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) tests. The FTIR analysis confirmed that incorporating VFLG neither affected the chemical structure of LiFePO4 nor initiated any side reactions during the LiFePO4 formation reaction. The XRD results showed that LFP/VFLG composites had better lattice parameters, crystallinity, and phase purity than LiFePO4 without VFLG addition. The Raman spectroscopy analysis indicated that LFP/VFLG composites had a lower disorder in the carbon arrangement. HRTEM results indicated that a VFLG was successfully wrapped around the LFP particle offers a versatile way to enhanced electrochemical performance of LFP/VFLG composites. The galvanostatic discharge profiles showed an enhancing specific discharge capacity of up to 58.3% after incorporating VFLG. The cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) tests revealed that LFP/VFLG delivered small polarization, low inner resistance, high electrochemical reaction reversibility, and high lithium-ion diffusion coefficient. VFLG is a promising additive to improve the structural and electrochemical properties of the LiFePO4 cathode of lithium-ion batteries.