氯
臭氧
流出物
水消毒
制浆造纸工业
环境科学
水处理
原木减少
化学
废物管理
环境工程
食品科学
工程类
有机化学
作者
Fanqin Wei,Yun Lu,Qi Shi,Zhuo Chen,Kuixiao Li,Ting Zhang,Yulong Shi,Qi Xu,Hong-Ying Hu
出处
期刊:Water Research
[Elsevier]
日期:2022-01-01
卷期号:211: 118037-118037
被引量:6
标识
DOI:10.1016/j.watres.2022.118037
摘要
The increasing requirement for reclaimed water has made it necessary to utilize multiple disinfection processes for efficient removal of organoleptic indicators, while guaranteeing microbial safety. However, there is not a proper way to appropriately distribute the operation load between different disinfection units. This study provides a new method to optimize doses of sequential ozonation, ultraviolet (UV) irradiation and chlorine disinfection units, and investigates the synergistic effects of combined disinfection on the basis of pilot tests. In this method, the minimal ozone dose is determined first for the removal of colority. The chlorine dose is then adjusted according to the required residual chlorine. At last, since it has few side effects and relatively low operating costs, UV dose is determined by the remaining requirement of microbial indicator reduction. By this method, the effluent of disinfection could meet the discharge standards of colority, residual chlorine, and microbial indicators. The operating cost was reduced by 48.7%, mainly by lowering the ozone dosage. The production of disinfection by-products (DBPs) was effectively controlled by decreasing the chlorine dosage compared with the original working conditions in the plant. Moreover, ozone pretreatment effectively improved the coliform inactivation efficiency of chlorine, and the combined disinfection method alleviated the tailing phenomenon and achieved a higher maximum log reduction of coliforms. The proposed method can help water reclamation plants reasonably determine operational loads between disinfection units with low cost and guaranteed performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI