Salt-assisted surface charge driven synthesis of large pores alumina as carbon tolerance support for propane dehydrogenation

Porous alumina has been widely used as catalytic support for industrial processes. Under carbon emission constraints, developing a low-carbon porous aluminum oxide synthesis method is a long-standing challenge for low-carbon technology. Herein, we report a method involving the only use of elements of the aluminum-containing reactants (e.g. sodium aluminate and aluminum chloride), sodium chloride was introduced as the coagulation electrolyte to adjust the precipitation process. Noticeably, the adjustment of the dosages of NaCl would allow us to tailor the textural properties and surface acidity with a volcanic-type change of the assembled alumina coiled plates. As a result, porous alumina with a specific surface area of 412 m2/g, large pore volume of 1.96 cm3/g, and concentrated pore size distribution at 30 nm was obtained. The function of salt on boehmite colloidal nanoparticles was proven by colloid model calculation, dynamic light scattering, and scanning/transmission electron microscopy. Afterward, the synthesized alumina was loaded with PtSn to prepare catalysts for the propane dehydrogenation reaction. The obtained catalysts were active but showed different deactivation behavior that was related to the coke resistance capability of the support. We figure out the correlation between pore structure and the activity of the PtSn catalysts associated with the maximum conversion of 53 % and minimum deactivation constant occurring at the pore diameter around 30 nm of the porous alumina. This work offers new insight into the synthesis of porous alumina.