催化作用
氮化碳
光催化
材料科学
碳纤维
水溶液
氮化物
无机化学
化学
化学工程
纳米技术
物理化学
有机化学
复合材料
工程类
复合数
图层(电子)
作者
S. McGuigan,Stephen J. Tereniak,Carrie L. Donley,Avery Smith,Seongmin Jeon,Fengyi Zhao,Renato N. Sampaio,Magnus Pauly,Landon Keller,Leonard B. Collins,Gregory N. Parsons,Tianquan Lian,Eric A. Stach,Paul A. Maggard
标识
DOI:10.1021/acsaem.3c01670
摘要
While recent reports have demonstrated the attachment of molecular catalysts to amorphous, graphitic carbon nitrides (g-CN) for light-driven CO2 reduction, approaches to the utilization of crystalline carbon nitrides have remained undiscovered. Herein, a functional hybrid photocatalyst system has been found using a crystalline carbon nitride semiconductor, poly(triazine imide) lithium chloride (PTI-LiCl), with a surface-attached CoCl2(qpy-Ph-COOH) catalyst for CO2 reduction. The molecular catalyst attaches to PTI-LiCl at concentrations from 0.10 to 4.30 wt % and exhibits ∼96% selectivity for CO production in a CO2-saturated, aqueous 0.5 M KHCO3 solution. Optimal loadings were found to be within 0.42–1.04 wt % with rates between 1,400 and 1,550 μmol CO/g·h at an irradiance of 172 mW/cm2 (λ = 390 nm) and apparent quantum yields of ∼2%. This optimized loading is postulated to represent a balance between maximal turnover frequency (TOF; 300+ h–1) and excess catalyst that can limit excited-electron lifetimes, as probed via transient absorption spectroscopy. An increase in the incident irradiance yields a concomitant increase in the TOFs and CO rates only for the higher catalyst loadings, reaching up to 2,149 μmol CO/g·h with a more efficient use of the catalyst surface capacity. The lower catalyst loadings, by comparison, already function at maximal TOFs. Higher surface loadings are also found to help mitigate deactivation of the molecular catalysts during extended catalytic testing (>24 h) owing to the greater net surface capacity for CO2 reduction, thus representing an effective strategy to extend lifetime. The hybrid particles can be deposited onto an FTO substrate to yield ∼60% Faradaic efficiency for photoelectrochemical CO production at −1.2 V vs Ag/AgCl bias. In summary, these results demonstrate the synergistic combination of a crystalline carbon nitride with a molecular catalyst that achieves among the highest known rates in carbon-nitride systems for the light-driven CO2 reduction to CO in aqueous solution with >95% selectivity.
科研通智能强力驱动
Strongly Powered by AbleSci AI