晶闸管
材料科学
集成门极换流晶闸管
MOS控制晶闸管
光电子学
门极关断晶闸管
电气工程
电压
二极管
工程类
晶体管
栅氧化层
作者
S. O. Slipchenko,A. A. Podoskin,O. S. Soboleva,V. S. Golovin,D. N. Romanovich,Vladimir Kapitonov,A. E. Kazakova,K. V. Bakhvalov,N. A. Pikhtin,Т. А. Багаев,М. А. Ладугин,А. А. Падалица,А. А. Маrmalyuk,В. А. Симаков
标识
DOI:10.1109/ted.2021.3072606
摘要
The article presents a new design of an AlGaAs/GaAs low-voltage thyristor for efficient high-current pulse generation at high repetition rates. It is demonstrated that optimizing the low-voltage thyristor p-base doping profile by using a thin highly doped layer allows for a significant increase in the operating frequencies. This applies to both a thyristor working without an external load and a vertical stack of a thyristor with a laser diode mini bar (LDMB). It is shown that the use of a 0.1- μm-thick highly doped layer, formed at the side of the p-base close to the n-emitter, leads to a significant increase of the holding current, which in our case exceeds 70 mA. At the same time, we were still able to obtain a low residual voltage of 1.5 V and a high blocking voltage of 32 V. The developed low-voltage thyristors have demonstrated the possibility of generating current pulses of 30-ns duration at a repetition rate of 10/70 kHz with an amplitude of 125/110 A, as well as the efficient pumping of LDMBs and laser pulses with a peak power of 68/57.5 W, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI