Importance of iron complexation and floc formation towards phosphonate removal with Fe–electrocoagulation

Phosphonates are widely used scale inhibitors, but the residual phosphonates in drainage are challenging to remove because of their chelating capacity and resistance to biodegradation. Here, we reported a highly efficient and robust Fe-electrocoagulation (Fe-EC) system for phosphonate removal. Surprisingly, we found for the first time that phosphonates like NTMP were more efficiently removed under anoxic conditions (80% of total soluble phosphorus (TSP) in 4 min) than oxic conditions (0% of TSP within 6 min) in NaCl solution. A similar phenomenon was observed when other phosphonates, such as EDTMP and DTPMP, were removed, highlighting the importance of iron complexation and floc formation toward phosphonate removal with Fe-EC. We also showed that the removal efficiency of NTMP by electrochemically in-situ formed flocs (97%) was much higher than post-adsorption systems (ex-situ, 40%), revealing that the growth of flocs consumed the active site for NTMP adsorption. Beyond the removal of TSP, 10 % of NTMP-P was also degraded after the electrolysis phase, evidenced by the evolution of phosphate-P. However, this did not happen in anoxic or chemical coagulation processes, which confirms the formation of reactive oxygen species via Fe(II) oxidation in the oxic Fe-EC system. The primary removal mechanism of phosphonates is due to their complexation with iron (hydr)oxide generated in the Fe-EC system by forming a Fe-O-P bond. Encouragingly, the Fe-EC system exhibits comparable or even better performance in treating phosphonate-laden wastewater (i.e., cooling water). Our preliminary cost calculation suggests the proposed system (€ 0.009/m