CsPbBr3 nanocrystals plasmonic distributed Bragg reflector waveguide laser

The recent development of perovskite-based lasers showcased the outstanding optical properties of the material such as high absorption coefficient and high quantum yield. The lasers were demonstrated in the form of nanowires and nanoplates, which are difficult to be integrated on a chip in the form of high-density arrays due to the difficulties in positioning them on the chip. The solution to this problem should be to use the well-known lithography process in the fabrication process of the lasers. In this work, we demonstrate several perovskite-based plasmonic lasers that were fabricated by using the lithographic in-mold patterning method that relies on the electron beam lithography process. The lasers utilized CsPbBr3 perovskite nanocrystals as the gain material and plasmonic distributed Bragg reflector grating structure as the optical feedback provider to achieve a low lasing threshold of 42.5 μJ/cm2 with a linewidth of 0.6 nm (FWHM) at room temperature. The use of the lithographic process in the fabrication of the lasers makes it possible to fabricate and integrate them on a chip in a relatively high-density manner, so that they can be used extensively in quantum optics and on-chip integrated photonics applications.