Aggregation Tuning with Heavily Fluorinated Donor Polymer for Efficient Organic Solar Cells

The fluorination/sulfofication-induced effect in the photovoltaic polymer solar cells (PSCs) needs to be paid much attention. In this work, a new donor polymer PBDB-PS2F was synthesized by heavily fluorinated and decorated S atom on the side chain of benzo[1,2-b:4,5-b']dithiophene (BDT) unit to explore the internal combined effect of F&S on the photoelectric performance. It was found that the heavy fluorination on the side chain could make PBDB-PS2F achieve a low highest occupied molecule orbital (HOMO) energy level of -5.72 eV and weaken the torsion of the main chain and effectively increase the intermolecular π-π* transition. Encouragingly, compared with the counterpart polymer PBDB-PS without the fluorination, PBDB-PS2F exhibited a much intense aggregation at room temperature but showed a tendency of reduced aggregation at high temperatures. This feature gives excellent solution processability and uniform morphology in the active layer of a PBDB-PS2F-based device, enabling an outstanding photovoltaic performance with the power conversion efficiency (PCE) of 13.56% (VOC = 0.90 V, JSC = 21.53 mA/cm2, FF = 69.68%). Compared with that of the counterpart polymer PBDB-PS with no heavy fluorination, the VOC of PBDB-PS2F increased by 15.4% and the PCE increased by 30.9%. Thus, the heavy-fluorination-induced effect to construct photovoltaic polymers could be used to improve the performance of polymer solar cells.