金刚石车削
伺服机构
伺服
职位(财务)
计算机科学
光学
运动控制
位置传感器
反冲
物理
机床
伺服控制
声学
机械加工
电气工程
机械工程
人工智能
角位移
工程类
机器人
经济
财务
摘要
LODTM, built by LLNL for DOD, is a precision vertical lathe used to diamond turn large optical parts (to 64" diameter) to 1 μinch rms figure error. The LODTM motion controls require precision sensors, precision servos, and a wideband (330 Hz) real time computer. Position is sensed to 1/40 μinch resolution by laser interferometers and differential capacitance gauges. Precision servos operating at 1/10 μinch resolution and at low velocities with zero backlash are required. A unique Fast Tool Servo (FTS), located close to the diamond tool, adjusts the final tool position. The LODTM controls coordinate the X, Z, and FTS servos to cause the tool to move on a specified contour and at a specified feedrate in the X-Z plane. The part floppy diskette commands this motion with a linear CNC and real time (32-bit) computer. During each 1.5 ms sample time, the computer must DMA 14 sensor readings into memory, calculate the X and Z Tool Coordinates, calculate the FTS input, output the following errors, output the FTS input, store "flight recorder" information, and check for anomalies.
科研通智能强力驱动
Strongly Powered by AbleSci AI