Highly concentrated LiN(SO2CF3)2/dinitrile electrolytes: Liquid structures, transport properties, and electrochemistry

Liquid structures, transport properties, and electrochemical properties of binary mixtures of lithium bis(trifluoromethanesulfonyl)amide (LiTFSA) and dinitrile solvents [succinonitrile (SN), glutaronitrile (GN), and adiponitrile (ADN)] were investigated. In the LiTFSA/SN and LiTFSA/ADN systems, the stable crystalline solvates of LiTFSA–(SN)1.5 [melting point (Tm): 59 °C] and LiTFSA–(ADN)1.5 (Tm: 50 °C) were formed, respectively. In contrast, the LiTFSA/GN mixtures of a wide range of compositions were found to be glass-forming liquids at room temperature. Raman spectroscopy of LiTFSA/GN liquid mixtures revealed that increasing the LiTFSA concentration results in the formation of the solvent-bridged network structure Li+–GN–Li+. In addition, the considerable formation of contact ion pairs and ionic aggregates was observed in highly concentrated electrolytes. In the liquids, the Li+ ion dynamically exchanged ligands (GN and TFSA) and higher LiTFSA concentrations led to an increase in the ratio of the self-diffusion coefficients of Li+ and TFSA−, DLi/DTFSA, as determined by pulsed field gradient NMR spectroscopy. The Li+ transference number (tLi+) of the [LiTFSA]/[GN] = 1/1.5 electrolyte in an electrochemical cell under anion-blocking conditions was estimated to be as high as 0.74. Furthermore, electrochemical measurements revealed that the reductive stability of the LiTFSA/GN electrolyte increases with increasing LiTFSA concentration. A [LiTFSA]/[GN] = 1/1.5 electrolyte is stable against the Li metal electrode, provided that the polarization is relatively small. Owing to high tLi+, a Li–S battery with the [LiTFSA]/[GN] = 1/1.5 electrolyte showed a high rate discharge capability despite its low ionic conductivity (0.21 mS cm−1) at room temperature.