Tough and highly conductive deep eutectic solvent-based gel electrolyte strengthened by high aspect ratio of hemp lignocellulosic nanofiber

Flexible electronic sensing and energy storage technology impose heightened demands on the mechanical and stable properties of gel electrolyte materials. Lignocellulosic nanofiber (LCNF) present a promising avenue for improving the properties of electrolyte networks and mechanical strength. In this study, LCNF derived from hemp fibers was prepared using lactic acid/choline chloride deep eutectic solvent (DES) through a combination of cooking and colloid mill mechanical treatment to achieve nanocellulose with a high aspect ratio and uniform dimensions. The outcomes demonstrated that LCNF, a width of below 20 nm and a length of over 5 μm, can be effectively produced through the DES cooking pretreatment in conjunction with colloid mill mechanical treatment. Meanwhile, DES lignin possessed a purity of ∼90 % and was obtained as a by-product. Subsequently, the as-prepared LCNF was integrated as a nanofiller into gel electrolyte. Ag-L NPs/LCNF/DES/PAA exhibited dense porous structures and showcased exceptional properties, including a high conductivity exceeding 10 mS/cm and remarkable adhesion strength surpassing 100 KPa. The presence of LCNF allowed Ag-L NPs/LCNF/DES/PAA to achieve strains above 1000 % and compression properties over 1000 KPa. The supercapacitor based on this assembly had a high specific capacitance of 271 F g