Research on the mechanical behavior of high-strength bolted joints between prefabricated concrete beams and columns

In this study, a high-strength bolted prefabricated concrete beam-column junction is presented, and the prefabricated concrete beam-column joint parts are put through eight quasi-static tests. The axial compression ratio and the steel plate hoop thickness were used in extended parameter research using finite element software to completely examine the seismic performance of the construction. According to the findings, this node's ductility coefficient ranges from 2.57 to 3.69, which is bigger than 3. The specimen loses part of its bearing capacity and constantly loses ductility as the axial compression ratio rises. The failure displacement of the specimen decreases with an increasing axial compression ratio, but the yield displacement of the specimen is very slightly affected by the axial compression ratio. This node has an excellent energy dissipation capacity despite having a low viscous damping coefficient between 0.2 and 0.4, and when the axial pressure ratio rises, the capacity grows in response to the elevated pressure. Despite this, the energy consumption of the beam-column member is not significantly affected by the steel plate hoop thickness. Additionally, according to the variable-angle truss-arch model and taking into account the representation of the truss-arch model under different conditions, this paper presents the equation for the shear load capacity of diagonal sections of prestressed high-strength spiral hoop-restrained concrete beams under various conditions.