Stress corrosion cracking behavior of an as-extruded Mg-1.8Zn-0.5Zr-1.5Gd magnesium alloy in a simulated body fluid

The microstructure, corrosion resistance, and stress corrosion cracking behavior of an ascast and solid-solution Mg-1.8Zn-0.5Zr-1.5Gdbiomagnesium alloy after extrusion deformation were studied.Results show that when the extrusion ratio was 7.7 and the extrusion temperatures were 350 and 360 • C, the as-cast and solid-solution alloys underwent complete dynamic recrystallization, and the grains were significantly refined.The precipitated phase in the extruded alloy is mainly composed of a nano-scale (Mg, Zn)3Gd and an Mg2Zn11 phase.A small amount of undissolved and broken micron-sized (Mg, Zn)3Gd phase particles appeared in the as-cast extruded alloy.The electrochemical corrosion produced during the stress corrosion process peeled off the (Mg, Zn)3Gd phase particles and induced rapid dissolution of the adjacent matrix.As a result, stresses were accumulated, and stress corrosion sensitivity occurred.At the same time, some larger-sized cracks appeared in the tensile fracture of the alloy.The difference in grain size and orientation in different regions of the solid-solution extruded alloy leads corrosion fracture to be composed of parallel grooves in different directions.Solution treatment of the magnesium alloy was found to reduce the stress corrosion susceptibility of extruded magnesium alloy and make it promising as a biodegradable implanting material.K e y w o r d s : magnesium alloy