晶闸管
电气工程
回转率
过电压
二极管
撞击电离
电压
电离
阳极
Boosting(机器学习)
上升时间
光电子学
材料科学
物理
工程类
计算机科学
离子
量子力学
机器学习
电极
作者
Alicia Ana del Barrio Montañés,V Senaj,T Kramer,Y Dutheil,M Sack
出处
期刊:Journal of physics
[IOP Publishing]
日期:2023-01-01
卷期号:2420 (1): 012085-012085
被引量:1
标识
DOI:10.1088/1742-6596/2420/1/012085
摘要
Abstract Impact ionization triggering can be successfully applied to standard thyristors, thus boosting their dI/dt capability by up to 1000x. This ground-breaking triggering requires applying significant overvoltage on the anode-cathode of a thyristor with a slew rate > 1 kV/ns. Compact pulse generators based on commercial off-the-shelf (COTS) components would allow the spread of this technology into numerous applications, including fast kicker generators for particle accelerators. In our approach, the beginning of the triggering chain is an HV SiC MOS with an ultra-fast super-boosting gate driver. The super boosting of a 1.7 kV rated SiC MOS allows to reduce the MOS rise time by a factor of > 26 (datasheet tr = 20 ns vs. measured tr < 800 ps), resulting in an output voltage slew rate > 1 kV/ns and an amplitude > 1 kV. Additional boosting is obtained by a Marx generator with GaAs diodes, reaching an output voltage slew rate > 11 kV/ns. The final stage will be a Marx generator with medium size thyristors triggered in impact ionization mode with sufficient voltage and current rating necessary for the triggering of a high power thyristor. This paper presents the impact ionization triggering of a small size thyristor.
科研通智能强力驱动
Strongly Powered by AbleSci AI