Rational construction of visible-light-driven perylene diimides/Fe2O3@C derived from MIL-88A (Fe) heterojunction with S-scheme electron transfer pathway to activate peroxymonosulfate for degradation of antibiotics

The novel composite photocatalytic material perylene diimides/Fe2O3@C (PDIs/Fe2O3@C) was constructed by a simple hydrothermal-calcination method and an oil bath method. 20 % PDIs/Fe2O3@C displayed a 16.4-fold increase in the rate of tetracycline (TC) removal over Fe2O3@C at 8 min. The main factor that enhanced photocatalytic performance was due to the combination of PDIs with Fe2O3@C, which effectively improved the phenomenon during the self-assembly of highly agglomerative PDIs, increased the specific surface area of Fe2O3@C, exposed more reaction sites, and promoted the activation of peroxymonosulfate (PMS) by Fe2+/Fe3+; and secondly, the composite of two different materials, both organic and inorganic, which effectively promoted the photogenerated electron transfer and the separation of electron-hole pairs, the a new S-scheme electron transport pathway is formed, which effectively promoted the photogenerated electron transfer as well as the e−-h+ separation, which was more favorable for the activation of PMS. The whole reaction pathway and product toxicity were thoroughly evaluated by Fukui function calculations, Liquid Chromatograph Mass Spectrometer (LC-MS), and Toxicity Estimation Software Tool (T.E.S.T.) simulation results, which demonstrated the rationality of the degradation pathway and the greatly reduced product toxicity. Moreover, the composites were effective and versatile for all other antibiotics (chlortetracycline (CTC), ciprofloxacin (CIP) and sulfadiazine (SDZ)). As an advanced oxidation process, the activation of PDIs/Fe2O3@C under visible light shows its potential application in pollutant degradation, which provides new perspectives and ideas for further effective treatment of real wastewater.