High sensitivity and multifunctional micro-Hall sensors fabricated using InAlSb/InAsSb/InAlSb heterostructures

Further diversification of Hall sensor technology requires development of materials with high electron mobility and an ultrathin conducting layer very close to the material’s surface. Here, we describe the magnetoresistive properties of micro-Hall devices fabricated using InAlSb/InAsSb/InAlSb heterostructures where electrical conduction was confined to a 30 nm-InAsSb two-dimensional electron gas layer. The 300 K electron mobility and sheet carrier concentration were 36 500 cm2 V−1 s−1 and 2.5×1011 cm−2, respectively. The maximum current-related sensitivity was 2 750 V A−1 T−1, which was about an order of magnitude greater than AlGaAs/InGaAs pseudomorphic heterostructures devices. Photolithography was used to fabricate 1 μm×1 μm Hall probes, which were installed into a scanning Hall probe microscope and used to image the surface of a hard disk.