Does the high biodiversity of lactococcal bacteriophages allow predictions about their different UV-C susceptibilities?

Fermentation processes can only succeed if intact and active starter cultures are present. Bacteriophages, which can lyse bacteria and thus bring entire fermentation processes to a standstill, therefore pose a major threat. Cheese production, for example, is often affected. The by-product whey can be highly contaminated with bacteriophages (≤109 plaque-forming units/mL) and in this state, further utilization is a quality and processing risk. Therefore, an orthogonal process consisting of membrane filtration followed by UV-C irradiation could be applied to eliminate bacteriophages and to generate "phage-free" whey. In order to define suitable process parameters, 11 lactococcal bacteriophages belonging to different families and genera and differing in their morphology, genome size, heat resistance, and other attributes, were screened for their UV-C resistance in whey. P369 was found to be the most resistant and could thus be well-suited as a biomarker. Starting from a 4 log unit bacteriophage reduction by membrane filtration, another 5 log unit decrease should be realized when applying a UV-C dose of 5 J/cm2. A clear correlation of UV-C sensitivity to the chosen attributes studied such as bacteriophage morphology and genome size was difficult and ambiguous, presumably because other yet unidentified parameters are important. Mutation experiments were performed with the representative bacteriophage P008 by multiple cycles of UV-C irradiation and propagation. A few mutational events were found, but could not be linked to an artificially generated UV-C resistance, indicating that the process used would probably not lose its effectiveness over time.