Optically Transparent Lead Halide Perovskite Polycrystalline Ceramics

We utilize room-temperature uniaxial pressing at applied loads achievable with low-cost, laboratory-scale presses to fabricate freestanding CH3NH3PbX3 (X– = Br–, Cl–) polycrystalline ceramics with millimeter thicknesses and optical transparency up to ∼70% in the infrared. As-fabricated perovskite ceramics can be produced with desirable form factors (i.e., size, shape, and thickness) and high-quality surfaces without any postprocessing (e.g., cutting or polishing). This method should be broadly applicable to a large swath of metal halide perovskites, not just the compositions shown here. In addition to fabrication, we analyze microstructure–optical property relationships through detailed experiments (e.g., transmission measurements, electron microscopy, X-ray tomography, optical profilometry, etc.) as well as modeling based on Mie theory. The optical, electrical, and mechanical properties of perovskite polycrystalline ceramics are benchmarked against those of single-crystalline analogues through spectroscopic ellipsometry, Hall measurements, and nanoindentation. Finally, γ-ray scintillation from a transparent MAPbBr3 ceramic is demonstrated under irradiation from a 137Cs source. From a broader perspective, scalable methods to produce freestanding polycrystalline lead halide perovskites with comparable properties to their single-crystal counterparts could enable key advancements in the commercial production of perovskite-based technologies (e.g., direct X-ray/γ-ray detectors, scintillators, and nonlinear optics).