Drimia maritima as a New Green Inhibitor for Al-Si Alloy, SAE Steel and Pure Al Samples in 0.5 M NaCl Solution: Polarization and Electrochemical Impedance Analyses

The corrosion inhibition effects of Drimia maritima (L.) Stearn sin. Urginea maritima (L.) Backer on three different materials, i.e., as-cast Al-7 wt.% Si alloy, SAE 1020 low carbon steel, and commercially pure Al samples, into a stagnant and naturally aerated 0.5 M NaCl solution are evaluated. For this purpose, both the potentiodynamic polarization curves and electrochemical impedance spectroscopy with an equivalent circuit are utilized. It is found that inhibition effect increases up to certain minor Drimia maritima content. Adsorption isotherms (e.g., Langmuir and Temkin) indicate that all three examined materials comprise physical adsorption mechanisms. Al-Si alloys attained inhibition efficiencies of about 96% at 25 °C with 1250 ppm of Drimia maritima and ~43% with 625 ppm at 45 °C. On the other hand, the cp. Al and SAE 1020 samples attain ~89% and 68% with 1250 ppm and 500 ppm at 25 °C, respectively. This clearly indicates that the dosage of Drimia maritima green inhibitor into NaCl solution possesses certain susceptibility for each distinctive material examined. Impedance parameters obtained by using CNLS (complex non-linear least squares simulations) are correlated and discussed.