Lv1
30 积分 2024-04-23 加入
Evaluation of fracture strength and failure mode of zirconia molar implant abutments manufactured with additive and subtractive manufacturing technologies
13小时前
待确认
A micro‐computed tomography analysis of internal and marginal fits of fixed partial dentures: Effect of preparation finish line designs on monolithic zirconia and heat‐pressed zirconia‐reinforced lithium disilicate
6个月前
已完结
Internal Fit and Marginal Adaptation of Posterior CAD/CAM Crowns Fabricated from Fully Crystallized Lithium Disilicate Compared to Partially Crystallized Lithium Disilicate with Two Finish Line Thicknesses: An In Vitro Study
6个月前
已完结
In vitro evaluation of the internal and marginal misfit of CAD/CAM zirconia copings
9个月前
已完结
A feasibility study on the use of an intraoral optical coherence tomography system for scanning the subgingival finish line for the fabrication of zirconia crowns: An evaluation of the marginal and internal fit
9个月前
已完结
Additive manufacturing of zirconia ceramics by material jetting
11个月前
已完结
Accuracy of additively manufactured zirconia four-unit fixed dental prostheses fabricated by stereolithography, digital light processing and material jetting compared with subtractive manufacturing
11个月前
已完结
3D printing of zirconia via digital light processing: optimization of slurry and debinding process
11个月前
已完结
3D printing of zirconia via digital light processing: optimization of slurry and debinding process
11个月前
已完结
Effect of Printing Layer Thickness on Optical Properties and Surface Roughness of 3D-Printed Resins: An In Vitro Study
11个月前
已完结
皖公网安备34019202002308
